7
SGBR 1500 A1
GB
IE
Using the rotisserie
WARNING! RISK OF INJURY!
►
Always use the tongs
w
to insert the hot rotis-
serie
z
into the appliance or to remove it.
■
You can use the two skewer clamps
t
to fi x the
food onto the rotisserie
z
. Loosen the restrainer
r
on the skewer clamps
t
, push them so that the
food is fi xed fi rmly in between the clamps and
then screw the restrainer
r
tight again.
■
First push the end of the rotisserie
z
without
the
notch into the drive
1
(Figure 1):
Fig. 1: Push the rotisserie
z
into the drive
1
.
■
Then insert the other end of the rotisserie
z
with
the deep groove in the spit fi tting
9
(Figure 2):
Fig. 2: Insert the rotisserie
z
in the spit fi tting
9
.
NOTE
►
Always slide the baking tray
q
into the lower
rail when you use the rotisserie
z
.
This will collect any drips.
■
To remove the hot rotisserie
z
, grip with
the hooks at the end of the tongs
w
into the
recesses on the rotisserie
z
(Figure 3):
Fig. 3: Hooking the tongs
w
onto the rotisserie
z
■
First lift the left-hand side of the rotisserie
z
out
of the spit fi tting
9
and then pull the rotisserie
z
from the drive
1
.
