1
Open box to check
Ø
When you receive the product, take it gently check if there is problem which cause
in transportation. At the same time please pay attention to see if there are some
parts enclosed:
INSTALLATION
Ø
Please confirm whether the voltage you have is same as signed on the light before
install.
Ø
Installed by technician. It muse be placed safety and best light angle.
Ø
Must keep space between light equipments and combustibles more than half a
meter. Keep space between light equipments and wall more than 0.15 meter.
Ø
The fans and vent-pipes should not be jammed by other equipment and decorate
materials.
Ø
The light must be fixture installed.
Ø
In safety view please put ground wire into the ground.
ATTENTION
Ø
Please do not open the bottom cover yourself without permission. Operate it
accord the user manual. Please call the technician in case the machine broken
down.
Ø
Do not use it under the damp and rain.
Ø
Pay attention to prevent the light from strong bump.
Ø
Prevent the dust into the product
Ø
Keep the vent-pipe well while working.
Ø
Keep the plug insert well before put into power.
Ø
Don't look the light directly to prevent make some destroy with eyes.
Ø
Don't light or extinguish frequently, otherwise the life span of the light tube will be
shortened.
Ø
In view of the special characters, after operated the light an hour the product shall
be paused about 15 minutes before be used next time.
Ø
Keep the space between light equipments and the lighted things more than one
meter.
Ø
Don't touch the product and draw the power line if you hand wet.
Ø
Don't open the cover for there have no parts the user can repair.
1. 1unit laser light 2. 1pc power cable
3.1pc Pin3 signal cable 4. 1pc user manual
