8
11
COLOR
SETTING
DIM3
DIM1
DIM2
DIM4
DIMMER
UC
OFF
PWM_RATE
POWER CCT
BLACK
SAVE
DMX ERROR
MCON
SELF
MASTER
UPLOAD
RESET
SEND
****
****
RESET
****
RGBtoW
OFF
600HZ
1200HZ
2000HZ
4000HZ
6000HZ
25000HZ
3200K
4200K
5600K
NORMAL
MENU
3.10 SPECIAL SETTINGS
[SETTING]...this menu allows the user to adjust key operation settings for this fixture.
Select[UPLOAD] to upload the custom programs from the current MASTER unit to the
SLAVE units.
In order to reset custom modes to default values select [RESET] .
Note: [UC]\[RGBW]\[CALIB.C] can t reset
[
COLOR
] is for activate/unactivate the color calibration functions. When [
RGBW
] is
selected, on RGB = 255,255,255, the color is displayed as calibrated
in CALIB.C -- RGBW. When[
COLOR
] is set [
OFF
] , on RGB = 255,255,255, the
RGBvalues are not adjusted and the output is most powerful.When [
UC
] is selected,
the RGB output are adjusted to a standard preset universal color which balances
fixtures from different generations.
Note: [COLOR]work only when choose [NORMAL]at [FULL POWER CCT]
Select [DIM1], [DIM2], [DIM3] or [DIM4] for different dimming speeds. ([DIM4]is the
slowest dimming speed)
[DMX ERROR] Choose[SAVE] in order to save the last DMX data incase of DMX
signal error.Choose[BLACK] in order to blackout in case of DMX signal error.
<PWM_RATE> is PWM reflesh rate bottom, press UP/DOWN to choose <600Hz>
<1200Hz>
<2000Hz>
<4000Hz>
<6000Hz>
<25000Hz>
Note: with reflesh rate increased, gray rate of dimmer will be reduced, (that's means
high reflesh rate, low gray rate), when it's <4000Hz>,CV3 is invalid, when it's
<25000Hz>,CV1 CV2 CV3 are invalid, so please lower PWM rate to increase gray rate
in necessary.
<FULL POWER CCT> is the color temperature choose bottom, press UP/DOWN to
choose, under full power, <3200K> <4200K>
<5600K> can be chosen, when
choose <COLOR>, <3200K> <4200K>
<5600K> are not work, but choose
<NORMAL>.
[MCON]...this function allows the user to select whether the fixture will send DMX
data to other fixtures during stand-alone operation. The [MAST] setting allows data
to be sent to Other fixtures. The [SELF] setting is default and will not send DMX data
To other fixtures.
1
MASTER DIMMER
RED
GREEN
BLUE
AMBER
LIME
2
3
4
8
NO FUNCTION
STROBE FROM
SLOW TO FAST
0-25Hz
NO FUNCTION
LIGHTNING STROBE
NO FUNCTION
RANDOM SROBE
179
DIMMER SPEED
STROBE
9
129
5
PRESET DIMMER SPEED FROM DISPLAY MENU
OFF
DIM1
DIM2
DIM3
DIM4
6
NO FUNCTION
L106
R05
L194
R54
L019
R08
R89
R86
L213
R377
R80
L202
L328
R3314
L101
L768
NO FUNCTION
40
100
160
7
CHANNEL
FUNCTION
VALUE
PRESET COLOR
