16
3
2.1 MOUNTING
2
INSTALLATION
The LED fixture can be mounted in a hanging
position using the supporting bracket. The bracket
should be secured to the mounting truss or structure
using a standard mounting clamp. Please note that
when hanging the unit a safety cable should also be
used.
HANGING
220~240V: 12 units may be connected in series
110~120V: 6units may be connected in series
2.2 POWER CONNECTIONS
The LED MODULE can be mounted at any angle and in any
position. It is possible to further adjust the angle of the LED
MODULE using the two adjustment knobs located on the side of
the fixture.
Note:
If the signal cable is over 60m between the DMX512 controller and fixture
or beween two fixtures, then a DMX signal amplifier is needed as well.
DIMMER SPEED
18
129
PRESET DIMMER SPEED FROM DISPLAY MENU
OFF
DIM1
DIM2
DIM3
DIM4
CHANNEL
FUNCTION
VALUE
