background image

Page 3 

 

 

The following flowchart describes the steps within the setup menu. 

 

 

 

 

Adjustable small shot size in tenths of seconds 

 (i.e. 19 = 1.9 seconds) 

Press top button to increase, middle button to decrease 

 

SKCRM1P: small shot indicator 

SKCRM2P: small shot indicator for right valve 

 

Advance 

SKCRM1P: medium shot indicator 

SKCRM2P: medium shot indicator for right valve 

 

Adjustable medium shot size in tenths of seconds 

Press top button to increase, middle button to decrease 

 

SKCRM1P: large shot indicator 

SKCRM2P: large shot indicator for right valve 

 

Adjustable large shot size in tenths of seconds 

Press top button to increase, middle button to decrease 

 

Adjustable small shot size in tenths of seconds 

Press top button to increase, middle button to decrease 

 

SKCRM1P: not used 

SKCRM2P: small shot indicator for left valve 

 

SKCRM1P: not used 

SKCRM2P: medium shot indicator for left valve 

 

Adjustable medium shot size in tenths of seconds 

Press top button to increase, middle button to decrease 

 

Summary of Contents for SKCRM2P

Page 1: ...the unit next to an oven heating element or hot air source which would affect the performance of the unit Electrical Connections Be sure to check the data plate located on the liner of the cabinet for required voltage prior to connecting the unit to power The specifications on the data plate supersede any future discussion The standard dispenser is equipped with an seven 7 foot power cord that req...

Page 2: ...ed whenever the walls accumulate a frost bank that is 1 2 inch thick To defrost the unit disconnect the power cord from the electrical receptacle and open the door After the frost has melted or come loose from the cabinet walls wipe out the cabinet interior Do not attempt to scrape or chisel off the frost as you could do irreparable damage to the unit MAINTENANCE Preventative maintenance is minima...

Page 3: ...in tenths of seconds Press top button to increase middle button to decrease SKCRM1P large shot indicator SKCRM2P large shot indicator for right valve Adjustable large shot size in tenths of seconds Press top button to increase middle button to decrease Adjustable small shot size in tenths of seconds Press top button to increase middle button to decrease SKCRM1P not used SKCRM2P small shot indicato...

Page 4: ...or for left valve Adjustable large shot size in tenths of seconds Press top button to increase middle button to decrease Temperature control cut in indicator Temperature control cut in value Changing value will change cabinet temperature proportionally Press top button to increase middle button to decrease Temperature control differential indicator Temperature control differential value Factory se...

Reviews: