12
10.1
Fitting & operating the hood on
the Seat unit.
10.1
To attach the hood locate the
mounting holes on the Sleepover seat
unit arms.
Fasten the press studs on the hood to
the seat unit - two at the back and
one at each side.
10.2
To remove the hood, firstly, undo
the 4 press studs from the Sleepover
hood - two at the back and one at
each side. Press the button on the
Sleepover seat unit arms and lift the
hood out. Failure to press the release
button may result in damage to your
product.
10.3
The Sleepover hood is multi positional.
Simply hold the front bar and gently
lift and lower.
10.4
Your Sleepover hood has a ventilation
panel underneath the rear panel and
a pop-out sun visor. (see 5.3)
10.2
10.3
