Special Installation. Hose Reel kit fitment for
Fitting the Spray Gun
Different model sprayers feature different
spray guns and have different inlets
Method 1.
Fit direct to hose.
The PA spray gun can
be directly fitted to the
¼” Fitting on the hose
reel
(Requires old existing
fitting to be removed).
1.
1. Fit the 2 x long brackets to the
tank with 4x M8x16mm Bolts,
Washer & Spring Washers
2. Fit the hose reel with the 4x M10
nuts Bolts, Washer & Spring Washers
3. Loop the Hosereel inlet hose under
as shown and cut to meet the pumps
inlet. Fit the elbow hosetail and hose
clamp then fit to the pump
30m Eco Reel
2.
3.
15m Reel (100L)
1. Fit the 1 x long and 1x angle bracket
to the tank with 3x M8x16mm Bolts,
Washer & Spring Washers
2. Fit the upright bracket as shown with
2x M8X25mm Bolts, Washer & nyloc
nuts
3. Fit Hose reel to the upright bracket
using 2x M8X25mm Bolts, Washer &
nyloc nuts.
4. Loop the inlet hose under the reel
and cut hose to suitable length to
meet the pumps inlet (allow length for
the hose to swivel). Fit elbow hosetail
and hose clamp then fit to pump
4.
1
.
2.
3.
15m Reel (200L)
1. Fit the 2 x long brackets to the tank
with 4x M8x16mm Bolts, Washer &
Spring Washers
2. Fit the upright bracket as shown with
2x M8X25mm Bolts, Washer & nyloc
nuts
3. Fit Hose reel to the upright bracket
using 2x M8X25mm Bolts, Washer &
nyloc nuts.
4. Loop the inlet hose under the reel
and cut hose to suitable length to
meet the pumps inlet (allow length for
the hose to swivel). Fit elbow hosetail
and hose clamp then fit to pump
4.
1.
2.
3.
Method 2.
Cut the hose.
The Triam and Spotjet spraygun both have
½” Connections which do not directly fit to
the hose reels ¼” fitting.
Remove any existing hose connections to
the spraygun. Cut the swaged fitting from the
hose reel then fit spraygun using the
included hosetail.
