japa
315+
User manual
Translation
15
315+ 2.0 - 2020
3.6 In-feed conveyor
The Japa 315 firewood processor comes as standard with an in-feed conveyor. The conveyor is activated
by pushing the sawing handle. When the in-feed conveyor is running, the pusher also moves towards the
knife.
In case of problems, see Chapter 6 of the manual. Troubleshooting
A. When the sawing handle is pushed,
the in-feed conveyor belt will begin
to run and feed logs into the
processor. The belt stops when the
handle is returned to the original
position.
DO NOT PLACE YOUR HAND BETWEEN THE BELT AND FRAME.
DO NOT TOUCH A MOVING BELT.