EN
EN
11
6. Get started!
1.
Select the
brush head
suitable for your skin
type. Gently push the
brush head
onto
the nipple which sits on top of the
brush
attachment point,
until you hear a click.
a
Make sure that the nipple covers the metal
attachment point
before you start your
treatment. This will prevent it from touching or
irritating your skin.
2.
Pour the face wash into the dispenser (see section “4.3 What
types of face wash can I use?”, and section “4.4 Adding liquid face
wash”).
3.
Dampen your face with lukewarm water.
4.
Moisten the
brush head
with lukewarm water. Do not use a
dry
brush head
on the face or neck, because it may cause skin
irritation.
5.
Press the
control button
to turn on the device. The device
automatically starts in the low speed vibration mode.
6.
To select the mode you want, keep pressing the
control button
to cycle through the modes (see section “4.2 Indicator lights and
function settings”).
7.
To release face wash, hold the device in an upright position
and
press the
dispensing button
once, then release. It may take
a second or so before the
dispenser
releases the face wash. The
device will release face wash for about 3 seconds. If you need
more, press the
dispensing button
again.
a
For first time use, press the
dispensing button
a few times until
face wash is released.
8.
Gently press the
brush head
against your skin and move it in an
upward circular motion. There's no need to apply any pressure.
a
Try to avoid delicate skin areas such as around the eyes or lips.
9.
To finish, rinse your skin with water, and pat dry with a towel.
Fresh UM EU124 2848B inside ALL ED225-05 spaces.indd 11
12/11/2017 08:42:00
Summary of Contents for Fresh H4001
Page 2: ...1 1 6 6 3 3 2 2 4 4 5 5 8 8 7 7 9 9 ...
Page 123: ......