Siliken SE3.3Ni, User Manual, Page: 39 / 58

Operation
38
user’s manual inverter SE3.3Ni - SE3.8Ni - SE4.6Ni
During the system checking, if the grid is not connected to the inverter, then the following message will be shown on the LCD and the system
will stay at this step.
Once the system check is done, the inverter goes into the monitoring mode. If all data needed for grid feeding is in the acceptable range, the
system will keep monitoring those data for a period of time. The following information tells users that the system will go into the grid feeding mode
in XXX seconds and then show the measured data of the three DC input voltages and the existing voltage and frequency on the grid side.
M o d e
S y s e m C h e c i n k t g
G r i d
N A
M o d e
N e x C o n e c t X X t X
M o n i t o r i n g
n s
V P V
X X V
V P V B V P V C A
X X X V X X X V X