Siliken SE3.3Ni, User Manual

Page: 14 / 58

3. After drill the holes, the mount bracket is then held against the wall and fastened on the wall with the anchors as shown in Figure 2.2.3.
4. Once the mount bracket is fastened, the inverter may be lifted up and hooked onto the bracket as shown in Figure 2.2.4.
Installation
13
user’s manual inverter SE3.3Ni - SE3.8Ni - SE4.6Ni
Fig. 2.2.3 Fasten the mount bracket
Fig. 2.2.4 Hooking inverter onto the bracket
60
80-150
The height of the anchor head <8mm