Siliken Atakama ATK-P60, Instructions For Use Manual

Page: 25 / 34

Mechanical assembly of the modules
24
to avoid direct contact between the metal parts of the PV module and
the supporting structure as well as to prevent possible deformations of
the parts that could damage the module.
Other fastening methods that attach the module around the perimeter
are also acceptable, such as those designed for integration on roofs or
similar methods.
A minimum space of 5 mm must be left between modules in order to
prevent contact between them due to thermal expansion. For less space
between modules, rubber gaskets that prevent contact must be used.
The recommended layout in the event that anchor clamps are used for
the module with a frame is the layout shown in the following schematic
of the Atakama PV modules.