Siliken Atakama ATK-P60, Instructions For Use Manual

Page: 11 / 34

By-pass diodes
10
WARNING: For the aforementioned reasons, it is important that the
diodes are not removed from the connection box.
In the event of by-pass diode failure, they must be replaced with original
by-pass diode spares and by personnel authorized and trained by Siliken.
From the moment that the failure in the diodes occurs and until they are
replaced, the affected photovoltaic module(s) must remain disconnected
from the other modules on the photovoltaic array, thus guaranteeing that
the circuit remains open. In any event, the decision to change the diodes
is the responsibility of Siliken.
WARNING: Failure to use original spares or parts replaced by
personnel without the authorisation of SILIKEN, etc., shall lead to
the withdrawal of the guarantee of the photovoltaic module and
SILIKEN shall automatically be exonerated from any responsibility
for damage caused to property or harm caused to people.
!
!