To o l St i c k P r o g r a m m i n g A d a p t e r
Rev. 0.3
9
Removing the Device from a Clam-Shell Socket
Figure 16. Removing a Device from a Clam-Shell Socket
A. Ensure that the ToolStick Base Adapter and the daughter card are on a level surface.
B. Press the latch to open the socket.
C. Using the tweezers, carefully remove the device from the socket.
Removing the Device from a Top-loading Socket
Figure 17. Removing a Device from a Top-loading Socket
A. Ensure that the ToolStick Base Adapter and the daughter card are on a level surface.
B. Using one hand, press the socket downward to open the space for the device. Use tweezers to carefully remove the device
from the socket. Release the downward pressure once the device is removed.
