S i 8 2 5 x M u l t i - P h a s e P O L - R D
8
Rev. 0.2
7. Open the Application Builder by selecting
Silicon Laboratories
Si825x
Application Builder
from the PC
programs menu.
8. Run the PMBus Monitor application by selecting
Options
Launch PMBus Monitor Tool
from the Application
Builder. The window shown in Figure 5 will appear. The PMBus Monitor can be used to control and configure
the target board. The target can be enabled/disabled through the monitor. The PMBus Monitor allows
parameters, such as fault thresholds, to be changed. It also reports operating conditions and problems.
Figure 5. View of the PMBus Monitor
