S i 5 3 6 5 / 6 6 - E V B S i 5 3 6 7 / 6 8 - E V B S i 5 3 6 9 - E V B
Rev. 0.6
3
3. Features
The Si5365/66-EVB, Si5367/68-EVB, and Si5369-EVBs each include the following:
CD with documentation and EVB software including the DSPLL
sim
configuration software utility
USB cable
EVB circuit board including a Si5366 (Si5365/66-EVB), a Si5368 (Si5367/68-EVB), or a Si5369 (Si5369-EVB)
User's Guide (this document)
4. Si5365/66-EVB, Si5367/68-EVB, and Si5369-EVB Quick Start
1. Install the Precision Clock EVB Driver. (This must be installed before the EVB is connected to the PC via the
USB cable.) For details, see Section "7.EVB Software Installation" on page 12.
2. Install the Precision Clock EVB Software. (Assumes that Microsoft .NET Framework 3.1 is already installed.)
3. Connect the two power supplies to the EVB. One is 3.3 V and the other is either 1.8, 2.5, or 3.3 V. The DUT is
powered by the 1.8/2.5/3.3 V supply.
4. Turn on the power supplies.
5. Connect a USB cable from the EVB to the PC where the software was installed.
6. Install USB driver.
7. Launch software by clicking on
Start
Programs
Silicon Laboratories
Precision Clock EVB Software
and selecting one of the programs.
