6.7 Workflow Scenario #2: Modifying the Default Silicon Labs-Created Device Configuration
To modify the “default” configuration using the CBPro Wizard, click on any of the underlined fields below the header "Edit Configuration
with Wizard". You can also pull down on the "Design Dashboard" menu and select a design step.
Figure 6.13. Edit Configuration with Wizard
You will now be taken to the Wizard’s step-by-step menus to allow you to change any of the default plan’s operating configurations.
UG362: Si5348-E Evaluation Board User's Guide
Using the Si5348-E-EVB and Installing ClockBuilderPro (CBPro) Desktop Software
silabs.com
| Building a more connected world.
Rev. 0.1 | 16
