11. VCXO Voltage Control Input Circuit
The drawing below shows the VCXO control voltage input (VC_IN) circuit used for evaluation of VCXOs. The VCXO control voltage can
be applied using the J1 SMA connector, or using TP3/TP6. A simple RC circuit is included to low-pass filter any noise on the input. The
RC circuit components can be removed or modified as required for your application.
Figure 11.1. VCXO Control Voltage Input "VC_IN"
UG298: Si5xxUC-EVB
VCXO Voltage Control Input Circuit
silabs.com
| Building a more connected world.
Rev. 0.3 | 19
