background image

Confidential Rev. 0.6 7/06

Copyright © 2006 by Silicon Laboratories

Si4700/01/02/03-EVB

Silicon Laboratories Confidential. Information contained herein is covered under non-disclosure agreement (NDA).

Si4700/01/02/03-EVB

Si4700/01/02/03 E

V A L U A T I O N

 B

O A R D

 U

S E R

S

 G

U I D E

1.  Introduction—Si4700/01/02/03 EVB

Thank you for purchasing the Silicon Laboratories, Inc. Si4700/01/02/03 FM Tuner Evaluation Board (EVB). This
EVB and associated software have been designed to speed the overall development process and decrease the
required development time from EVB to product launch. We have posted support articles, answers to frequently
asked questions, and application notes at 

https://www.mysilabs.com

.

The Si4700/01/02/03 EVB kit should include the following important items:

Si4700/01/02/03 FM Tuner customer welcome and evaluation letter
Si4700/01/02/03 baseboard Revision 1.2
Si4700/01/02/03 daughter card with pre-mounted Si4700/01 Revision 1.3 or Si4702/03 Revision 1.1
Wall transformer certified at 5 V/2 A, 100–240 V ac input and power input terminal (green)
USB cable
BNC to RCA adapters (2)
RCA to 1/8” jack cable
1/8” Barrel adapter (1)
EVB Characterization report
Si4700/01/02/03 Quick Start Guide
Si4700/01/02/03 CD including:

 

Data sheet

 

Development application GUI

Note:

This version of the document supports the second generation of the GUI software. Boards shipped prior to May 2006
may be reprogrammed to use this new GUI. Instructions for doing so can be found on mysilabs.com. For details on the
first generation GUI, please reference the 0.2 version of this document, also available on 

https://www.mysilabs.com

.

2.  Overview

The Si4700/01/02/03 Evaluation Kit includes an evaluation board (EVB) to facilitate evaluation of the
Si4700/01/02/03 using the associated software. The EVB consists of a baseboard with a pre-mounted daughter
card - the Si4700/01/02/03 is pre-installed on the daughter card. The Si4700 and Si4701 come in a 4 x 4 mm 24-
pin QFN package while the Si4702 and Si4703 come in a 3 x 3 mm 20-pin QFN package. The Si4701 and Si4703
offer RDS support, while the Si4700 and Si4702 do not. Several input/output (I/O) connections provide access to
the various subsystems on the EVB. Refer to Figure 1 for the locations of the various I/O connectors/devices.
This document references the Si4700/01 data sheet and the Si4702/03 data sheet.

Summary of Contents for Si4700-EVB











































Reviews: