C8051F2xx-DK
Rev. 0.6
5
6. Target Board
The C8051F2xx Development Kit includes a target board with a C8051F206/26 device pre-installed for evaluation
and preliminary software development. Numerous input/output (I/O) connections are provided to facilitate
prototyping using the target board. Refer to Figure 2 for the locations of the various I/O connectors.
P1
Power connector (accepts input from 7 to 15 VDC unregulated power adapter)
J1
VDDMonEn, Ties MONEN to +3VD2 or GND to enable/disable the VDD monitor
J2
64-pin I/O connector providing access to all I/O signals
P2.5
Connects SW2 to port pin P2.5
LED
Connects LED D2 to port pin P2.4
PWMIN
Connects PWM low-pass filter to port pin P2.7
J4
JTAG connector for Debug Adapter interface
J5
Connects P3.0 to analog signal from J6
J6
Analog I/O configuration connector
J7
Connects P3.1 to analog signal from J6
X1
Analog I/O terminal block
Figure 2. C8051F206 and C8051F226 Target Boards
PWMIN
JTA
G
SW1
SW2
P1
Pr
o
to
A
rea
Pin 1
Pin 1
Prototyping Area I/O Connection Points
J6
Pin 2
P2.5
RESET
J4
VDDMonEn
J5
J7
C8051
F2xx
J2
PW
R
P2.
4
LE
D
X1
P2.5
