manualshive.com logo in svg

Silicon Laboratories BGM11S Series, Manual, Page: 47 / 94

Share
Download
Silicon Laboratories BGM11S Series Manual Download Page 47

6.1  Layout Guidelines

This section contains generic PCB layout and design guidelines for the BGM11S module. Generally, please follow these guidelines:

• Place the module at the edge of the PCB, as shown in the figures in this chapter.
• Do not place any metal (traces, components, etc.) in the antenna clearance area.
• Connect all ground pads directly to a solid ground plane.
• Place the ground vias as close to the ground pads as possible.

Figure 6.1.  BGM11S PCB top layer design

Following rules are recommended for the PCB design:

• Trace to copper clearance 150um
• PTH drill size 300um
• PTH annular ring 150um

Important

:

The antenna area must align with the pads precisely. Please referto the recommended PCB land pattern for exact dimensions.

Figure 6.2.  BGM11S PCB middle and bottom layer design

BGM11S Blue Gecko 

Bluetooth

 

®

 SiP Module Data Sheet

Layout Guidelines

silabs.com

 | Building a more connected world.

Rev. 1.0  |  47

Summary of Contents for BGM11S Series































































































Reviews:

No comments