Silicon Graphics Virtu VN200, Hardware User'S Manual

Page: 34 / 108

18 007-5483-001
SGI Virtu VN200 Overview
CE Notice and Manufacturer's Declaration of Conformity
The “CE” symbol indicates compliance of the device to directives of the European
Community. A “Declaration of Conformity” in accordance with the standards has been
made and is available from SGI upon request.
Electromagnetic Emissions
This section provides the contents of electromagnetic emissions notices for various
countries.
FCC Notice (USA Only)
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference, in which case you
will be required to correct the interference at your own expense.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, you are encouraged to try to
correct the interference by using one or more of the following methods:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced technician.