Silicon Graphics Silicon Graphics F190, User Manual

Page: 16 / 18

English-10
Monitor Specifications F190 Flat Panel Display Notes
LCD Module Diagonal : 48cm/19 inches Active matrix; thin film transistor (TFT) liquid
Viewable Image Size : 48cm/19 inches crystal display (LCD); 0.294 mm dot pitch;
Native Resolution (Pixel Count): 1280 x 1024 225cd/m 2 white luminance; 500:1 contrast ratio,
typical.
Input Signal Video : ANALOG 0.7 Vp-p/75 Ohms Digital Input: DVI
Sync : Separate sync. TTL Level
Display Colors Analog input : 16,777,216 Depends on display card used.
Synchronization Range Horizontal: 31.5 kHz to 81.1 kHz (Analog) Automatically
31.5 kHz to 80.0 kHz (Digital)
Vertical: 56 Hz to 75 Hz Automatically
Image Formation Time 25 ms (Typ.)
Resolutions Supported 720 x 400* 1 :VGA text Some systems may not support
640 x 480*
1
at 60 Hz to 75 Hz all modes listed.
800 x 600* 1 at 56 Hz to 75 Hz
832 x 624* 1 at 5 Hz
1024 x 768* 1 at 60 Hz to 75 Hz
1152 x 870*
1
at 75 Hz
1280 x 1024 at 60 Hz ......................... Recommended resolution
Active Display Area Horiz.: 376.3 mm/14.8 inches
Vert.: 301.1 mm/11.9 inches
Power Supply AC100-120 V/220-240 V @ 50/60Hz
Current Rating 0.75 A@100-120 V, 0.4A @ 220-240 V
Dimensions 416.3 mm (W) x 388.7-498.7 mm (H) x 190 mm (D)
16.4 inches (W) x 15.3-19.6 inches (H) x 7.5 inches (D)
Without stand: 416.3 mm (W) x 352.8 mm (H) x 76 mm (D)
16.4 inches (W) x 13.9 inches (H) x 3.0 inches (D)
Weight 8.0 kg (17.6 lbs)
Without tilt stand: 5.8 kg (12.8 lbs)
Environmental Considerations
Operating Temperature : 5
°
C to 35
°
C/41
°
F to 95
°
F
Humidity : 30% to 80%
Feet : 0 to 3,000 m/0 to 10,000 Feet
Storage Temperature : -10
°
C to 60
°
C/14
°
F to 140
°
F
Humidity : 10% to 85%
Feet : 0 to 12,000 m/0 to 40,000 Feet
Regulations Safety: UL60950 (UL), CSA C22.2 No.60950 (c-UL),
EN60950 (TÜV-GS), CE-Marking
CCC
EMC: FCC Class-B, DOC Class-B,
EN55022 Class-B, VCCI Class-B,
EN61000-3-2, EN61000-3-3, EN55024
CCC, MIC, BSMI, C-Tick, CE-Marking
Other: MPR-II
ISO13406-2
TCO’99
International E
NERGY
S
TAR
Program
Specifications
* 1
Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different.
This is normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technolo-
gies, each dot on the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.
NOTE: Technical specifications are subject to change without notice.