manualshive.com logo in svg

Silicon Graphics Octane III, User Manual, Page: 6 / 64

Share
Download
Silicon Graphics Octane III User Manual Download Page 6

vi

007-5633-001

Contents

2.

System Operation and Troubleshooting

   .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     . 17

Operating Location Considerations   .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     . 17

Server Precautions    .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     . 18

Troubleshooting the System  .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     . 18

Enclosure Power Supply Status LEDs   .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     . 19
System Fan Failure   .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     . 20

3.

System I/O Interfaces Overview

    .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     . 21

Rear I/O Connectors  .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     . 21

USB Type A Connector .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     . 22
VGA Video Interface     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     . 23
RJ-45 (Ethernet) Connectors      .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     . 24
DB9 Serial Connector    .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     . 25
DVI-I Video/Monitor Port   .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     . 26

4.

Octane III Workstation BIOS Information

   .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     . 27

Starting the BIOS Setup Utility   .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     . 27
How To Change the Configuration Data .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     . 28

Starting the Setup Utility      .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     . 28
Main Setup Screen   .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     . 28
Advanced Setup Configurations.     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     . 30

BOOT Features .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     . 30
Remote Access Configuration  .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     . 41
Hardware Health Monitor   .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     . 42
IPMI Configuration .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     . 46
SEL PEF Configuration      .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     . 48
The DMI Event Log      .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     . 49
Security Settings     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     . 50
Exit Options.     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     . 52

BIOS Error Beep Codes  .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     . 52

A.

Technical Specifications

     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     . 55

Server Specifications and Features   .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     . 55
Environmental Specifications     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     . 56
Optional Solid State Disk Parameters     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     . 56

Summary of Contents for Octane III

































































Reviews:

No comments