Silicon Graphics Octane III, User Manual, Page: 57 / 64

How To Change the Configuration Data
007-5633-001 49
The options are Enabled and Disabled.PEF Alert Startup Delay -This sets the pre-determined time
to delay PEF alerts after system power-ups and resets. Refer to Table 24.6 of the IPMI 1.5
Specification for more information at www.intel.com. The options are:
No Delay, 30 sec, 60 sec, 1.5 min, 2.0 min.
Startup Delay - This feature enables or disables startup delay. The options are Enabled and
Disabled.
PEF Startup Delay -This sets the pre-determined time to delay PEF after system power-ups and
resets. Refer to Table 24.6 of the IPMI 1.5 Speci.cation for more information at www.intel.com.
The options are No Delay, 30 sec, 60 sec, 1.5 min, 2.0 min.
Event Message for PEF Action - This enables of disables Event Messages for PEF action. Refer
to Table 24.6 of the IPMI 1.5 Speci.cation for more information at www.intel.com. The options
are Disabled and Enabled.
BMC Watch Dog Timer Action
Allows the BMC to reset or power down the system if the operating system hangs or crashes. The
options are Disabled, Reset System, Power Down, Power Cycle.
BMC Watch Dog TimeOut [Min:Sec]
This option appears if BMC Watch Dog Timer Action (above) is enabled. This is a timed delay in
minutes or seconds, before a system power down or reset after an operating system failure is
detected. The options are [5 Min], [1 Min], [30 Sec], and [10 Sec].
The DMI Event Log
View Event Log
Use this option to view the System Event Log.
Mark all events as read
This option marks all events as read. The options are OK and Cancel.
Clear event log
This option clears the Event Log memory of all messages. The options are OK and Cancel.