manualshive.com logo in svg

Silicon Graphics Octane III, User Manual, Page: 51 / 64

Share
Download
Silicon Graphics Octane III User Manual Download Page 51

How To Change the Configuration Data

007-5633-001

43

Warning:  

Any temperature that exceeds the CPU threshold temperature predefined by 

the CPU manufacturer may result in CPU overheat or system instability. When the CPU 
temperature reaches this predefined threshold, the CPU and system cooling fans will run at 
full speed. 

The options are: 

•

The Early Alarm: Select this setting if you want the CPU overheat alarm (including the LED 
and the buzzer) to be triggered as soon as the CPU temperature reaches the CPU overheat 
threshold as predefined by the CPU manufacturer. 

•

The Default Alarm: Select this setting if you want the CPU overheat alarm (including the 
LED and the buzzer) to be triggered when the CPU temperature reaches about 5oC above 
the threshold temperature as prede.ned by the CPU manufacturer to give the CPU and 
system fans additional time needed for CPU and system cooling. In both the alarms above, 
please take immediate action as shown below. (See the notes on P. 4-18 for more 
information.) 

CPU Temperature/System Temperature 

This feature displays current temperature readings for the CPU and the System. 

The following items will be displayed for your reference only: 

CPU Temperature 

The CPU thermal technology that reports absolute temperatures (Celsius/Fahrenheit) has been 
upgraded to a more advanced feature by Intel in its newer processors. The basic concept is each 
CPU is embedded by unique temperature information that the motherboard can read. This 
‘Temperature Threshold’ or ‘Temperature Tolerance’ has been assigned at the factory and is the 
baseline on which the motherboard takes action during different CPU temperature conditions (i.e., 
by increasing CPU Fan speed, triggering the Overheat Alarm, etc.) Since CPUs can have different 
‘Temperature Tolerances’, the installed CPU can now send information to the motherboard 
regarding what its ‘Temperature Tolerance’ is, and not the other way around. This results in better 
CPU thermal management. 

The manufacturer has leveraged this feature by assigning a temperature status to certain thermal 
conditions in the processor (Low, Medium and High). This makes it easier for the user to 
understand the CPU’s temperature status, rather than by just simply seeing a temperature reading 

Summary of Contents for Octane III

































































Reviews:

No comments