SGI
®
10-Gigabit Ethernet Network Adapter User’s Guide
The output will display information about the network adapters currently
installed in the system, as follows:
Name Mtu
Network
Address
Ipkts Ierrs Opkts Oerrs Coll
xg1
1500
10.50.1
system.name 0
0
1
0
0
2. To bring down the adapter, enter the following command, where
N
is the number
of the adapter:
ifconfig xg
N
down
3. To change the MTU size of the 10-Gbit Ethernet adapter, enter the following
command, where
N
is the number of the adapter:
ifconfig xg
N
mtu 9600
4. To restart the adapter, enter the following:
ifconfig xg
N
up
5. Enter the following command to verify that the MTU size has been changed:
netstat -i
The output should look similar to the following:
Name Mtu
Network
Address
Ipkts Ierrs Opkts Oerrs Coll
xg1
9600
10.50.1
system.name 0
0
3
0
0
007–4669–002
13
