Silhouet-Tone ESSENTIAL Peel, Instruction Manual

Page: 18 / 24

420903-
Essential Peel Instructions Manual-rev000
l
17
06.
Combining Microdermabrasion with Facial Procedures
The Essential Peel is a microdermabrasion system used to perform skin exfoliation.
Microdermabrasion may be used to enhance the effects of other facial procedures. When used prior to applying
professional aesthetic products it will accelerate results. When combined with microdermabrasion, cosmetic ingredients
work at their full capacity.
NOTE: It is important to check the pH of cosmetic products. Low pH (acidic products) may cause an irritation. Products with a pH
between 4.5 and 7.0 (with neutral pH) will be better tolerated.
Preparing the skin prior to a facial procedure:
§
Cleanse the skin with an oil free cleanser.
§
Dry the skin completely using hair dryer.
§
Use microdermabrasion phase 1 and 2 only (using lower intensity on sensitive skin).
§
Do not use steamers after microdermabrasion, heat may cause irritation
§
Extract blackheads and comedones.
§
Disinfect the skin.
§
Apply cosmetic preparations (must be pH balanced).
§
Perform a manual massage.
§
Apply a hydrating or soothing mask.
§
Apply soothing protective cream. Avoid using oil based or comedogenic products on oily skin, they might cause
outbreaks.
WARNING:
Do not use chemical peels or any product containing AHAs (as glycolic acid), BHA (as salicylic acid), TCA
(trichloroacetic acid), phenols, retinoids (as Retinol-A) or modified Jessner solutions (salicylic acid, lactic acid,
resorcinol) in combination with microdermabrasion.