Silex technology SX-NEWAH, Startup Manual

Page: 7 / 32

5. Before You Begin
□ SX-NEWAH-EVK (SX-NEWAH (IEEE 802.11ah wireless module) is installed ）
□ Antenna for SX-NEWAH
□ AC adaptor for SX-NEWAH-EVK
□ Raspberry Pi 3 Model B ( hereinafter, “ Raspberry Pi ” )
□ AC adaptor for Raspberry Pi (5V/3A or higher)
- Recommended for the radio to operate properly in accordance to the module
specification
□ Micro SD card (8GB or higher ・ UHS-I / Class 10 or higher)
The following items are necessary to use SX-NEWAH-EVK:
□ PC (Windows 10 or higher is recommended)
(Optional. Please prepare as necessary.)
□ Ethernet cable
□ HDMI compatible monitor
□ HDMI cable
□ USB keyboard ／ mouse
□ micro SD card reader/writer
□ Terminal software (e.g. Tera Term, etc.)
➢ In this document, Tera Term (Version 4.102) is used.
□ Software to write an SD card image (e.g. Win32 Disk Imager, etc.)
➢ In this document, Win32 Disk Imager (Version 1.0) is used.
(Refer to 7.2.2 for how to write an image using this software.)
* To use Raspberry Pi with other devices (e.g. sensor, etc.), prepare the necessary items for
it.
* This product uses the 920MHz. Recommend that prepare two of EVK in total for AP and
STA mode.