1.
Outline
SX-NEWAH is a wireless LAN module that complies with the 915MHz band standard IEEE
802.11ah. Transmission of over 1 Mbps of 1km wireless distance (*).
By connecting this product to Raspberry Pi, the functions of SX-NEWAH can be used.
(*) The wireless distance and throughput vary depending on your environment.
2.
Feature
✓
IEEE 802.11ah support
✓
NEWRACOM
’
NRC7292 chipset
✓
1/2/4MHz bandwidth
✓
MCS0-7, MCS10 transfer rate (MCS10 can be used only when the bandwidth is 1MHz.)
✓
WPA3(SAE/OWE)
✓
The wireless setting can be retrieved and configured using a special utility.
✓
MHF1 connector installed for external antennas
✓
SPI host interface support
Summary of Contents for SX-NEWAH
