Before turning on SX-NEWAH-EVK, prepare a micro SD card to which an OS image is written.
To use SX-NEWAH-EVK via SSH, install the terminal software on your PC.
In this document, Tera Term is used as an example.
Following explains how to write an image using Win32 Disk Imager to the Windows
environment.
Download Win32 Disk Imager from the URL below.
https://sourceforge.net/projects/win32diskimager/
Execute the installer you have downloaded, and install it according to the instructions.
When the installation is completed, insert the micro SD card into your PC (when your PC does
not support direct connection of a micro SD card, use a micro SD card reader).
(1)
When the Win32 Disk Imager is started, the below window will appear.
Click the pull-down menu to select the drive to write the image into.
Summary of Contents for SX-NEWAH
