8
SET-UP
Connect the (optional) Battery Pack at least 24 hours before operating the RPS to
allow the batteries to equalize.
1.
Place the Battery Pack 8-10 inches away from a wall.
2.
Place the RPS on top of the Battery Pack.
3.
Tilt the RPS backwards so that the bottom is lifted away from the Battery
Pack top, this will expose the Case Plug and allow easy connection.
4.
Remove the Case Plug from the RPS bottom to expose the High-Current
Connector. A flat blade screw driver can be used to aid removal of the Plug.
Note: The Battery Pack cable has a longer reach by design and also more
space inside the case for cable storage.
Summary of Contents for RPS
Page 14: ...14 ...
Page 15: ...15 ...
Page 16: ...16 ...
Page 18: ...18 Maximum RPS Battery Voltage swing when system is sustainable ...
