manualshive.com logo in svg

Silent Gliss Move, Original Operating Instructions, Page: 6 / 43

Share
Download
Silent Gliss Move Original Operating Instructions Download Page 6

6 | EN

Internet connection). The well-established bidirectional wire

-

less system Silent Gliss 9940 ensures smooth operation. 

The system allows users to operate and use roller shutters, 

blinds, marquises, lighting and similar wireless-operated 

appliances whilst at home or when out and about. 
Other areas of application must be discussed with the 

manufacturer beforehand. 

The operator shall be exclusively liable for any damage 

caused by improper use of the appliance. The manufacturer 

does not accept liability for any personal or material dam-

age caused by misuse, incorrect installation or by improper 

handling or commissioning.  
All uses not described under the intended purposes ap-

proved by the manufacturer shall be considered as intended 

misuse. 

1.4  Warranty and liability 

The manufacturer's General Terms of Sale and Delivery 

shall generally apply . Any warranty claims relating to per-

sonal or material damage shall be rejected insofar as they 

are based on one or several of the following causes: 
•  the customer opens the appliance (breaking the seal) 
•  the appliance is used for an improper purpose 
•  improper assembly, commissioning or operation of the 

appliance 

• 

modifications to the appliance without written consent 

from the manufacturer 

•  operation of the appliance with incorrectly installed con-

nections, defective safety fittings or improperly attached 

safety or protective fittings 

•  failure to adhere to the safety requirements and instruc-

tions contained in these operating instructions 

Summary of Contents for Move












































Reviews:

No comments