There may be a time when you want to disable your VCPM such as when you
give your vehicle to a mechanic or you are getting your car washed.
Putting your VCPM into “Valet Mode”:
1. Turn off your ignition key (the LED on the VCPM will begin to flash)
2. Locate the valet switch and flip it to the opposite position (The LED will
stop flashing and LED will be off).
Note: Use of the valet mode will not effect the vehicle security system
once it is set off (Triggered). When the vehicle security system is trig-
gered, press the “Unlock” button on your dealer supplied transmitter
to disarm the vehicle security system.
Getting Out of Valet Mode:
If you forget to turn your VCPM back on, the LED will remind you that the
unit is in valet mode. In valet mode, the LED will be ON and NOT flashing
every time you turn the ignition key on.
To get out of valet mode, simply locate the valet switch and flip the switch
to the opposite position.
Valet Mode
Flashing LED Indicator
