Proposed
© 2005 Copyright Magnadyne Corp.
1111 West Victoria Street
Compton, CA 90220
www.magnadyne.com
ON
O
O F F
☛
Turn On Ignition
Push the Valet Switch
6 Times for Red Button
12 Times for Black Button
(Represents 6 Times On/Off)
A. The LED will flash 6 times.
B. 6900P, 6900P-2 or 6905P: If the
5911 buzzer is installed, it will emit
6 beeps.
6909P: The horn/siren will emit 6
beeps. Also the parking lights will
flash 6 times.
Turn Off Ignition
A. The LED will be off. You are now
in the “Sleep” mode.
☛
S t e p 2
Insert the Valet Switch
S t e p 1
Dealer Switch
(Red Button)
Consumer Switch
(Black Button)
Insert the White “Sleep”
Key into the Receptacle
In the event the customer declines to purchase the Silencer security system and the system is not going to be removed
from the vehicle, it must be put into “Sleep” mode to prevent automatic arming.
The white sleep key can also be used to delete a dealer code and to reset the security system to it’s original state as it
was received from the factory.
Note: The system must be in dealer mode to use the white key. If the system is armed, you should disarm it with the
dealer key to prevent triggering.
S t e p 6
P R O G R A M M I N G T H E U N I T T O “ S L E E P M O D E ”
ON
OFF
Momentary Switch
(Push On/Off)
Toggle Switch
(Push On then
push it again for off)
S t e p 3
Remove the White “Sleep”
Key
S t e p 5
S t e p 4
Models: 7921P, 7909P, 7905P
6900P, 6900P-2, 6905P, 6909P
