Operating manual
Twister II NA
Copyright Silca S.p.A. 2015
1
GUIDE TO THE MANUAL
This manual has been produced to serve as a guide for users of the TWISTER II NA key-cutting machine. Read
it carefully; it is essential if you wish to operate your machine safely and ef
fi
ciently.
Consultation
The contents of the manual are divided into sections relating to:
-
Transport and handling ...............................................................................................Ch. 1
-
Description of machine and safety devices ................................................................Ch. 2-3-4
-
Proper use of machine ...............................................................................................Ch. 5-6-7
-
Maintenance ...............................................................................................................Ch. 8-9-10
Technical terms
Common technical terms are used in this manual. To assist those with little experience of key cutting, below is an
illustration of the terms used for the different parts of keys.
DIMPLE KEYS
keys with holes of different dimensions,
depths, positions and shapes.
LASER (SIDEWINDER) TYPE KEY
LASER is the name given to the
special sidewinder milled keys.
Fig. 1
1) Head
5) Tip
2) Rim
6) Edge
3) Shoulder Stop
7) Cuts
4) Stem
