Operating manual
Matrix ONE
Copyright Silca 2014
31
B6
B7
B6
B7
B4
B4
B5
B5
Fig. 59
6.14 REPLACING THE JAWS
Make sure the motor ON switch is OFF .
6.14.1
REPLACING THE FIXED JAWS
1) Loosen the 2 screws (B6) or (B7) and remove the jaw .
2)
Fit the new jaw up against the left-hand side and align also from the front (Fig. 61).
3) Tighten the 2 screws (B6) or (B7) without exerting pressure.
4) Check alignment (chap.6.13.1) and then fully tighten the screws (B6) or (B7).
Fig. 60
Fig. 61
