Siku OB115N, Installation And Operation Manual

Page: 24 / 96

pull the power cable to the inside of the appliance th-
rough the hole at the back of the unit
attach the rear of the appliance to three hooks of the
support panel and secure it using 2 screws at the bottom
and at the center of the appliance
Note: the unit cannot be installed securely if the hooks
are not properly positioned
Connection
1. Detach the cable as shown in the figure
2. Connect the power cable to terminal block
3. Tighten the screws and tighten the cable to make
sure the contacts are securely fixed
4. Install and tighten the cable clamp
To replace the front panel
1. Insert the Clips of the panel an the device and replace
the two screws previously removed
2. Replace the tank
3. Make sure the air filter is fitted securely into the slot.
1
2
3