ECO Actuator PotFree
80 001 50 Manual ECO Actuator PotFree ECO Rev1.0
GB
Remote-controlled potential-free relay
Installation manual
Package contents
1 pc ECO Actuator PotFree
1 pc installation manual
Product description
ECO Actuator PotFree is a remote controlled relay in small format
that can provide a control signal to other equipment. The relay is
potential-free and therefore not connected to mains 230VAC
internally. This allows the ECO Actuator PotFree to be used to
control many different types of equipment. ECO Actuator PotFree
can be programmed to work in several different ways by using the
Sikom Living app. For example, regular on / off mode and pulse
mode with adjustable pulse time.
ECO Actuator PotFree must be connected wirelessly to a Sikom
ECO gateway. A list of compatible gateways is found at
www.sikomliving.com Available features will be available in the
Sikom Living app.
Installation
ECO Actuator PotFree is made in a compact format to fit in tight
enclosures, wall boxes, and inside other products' enclosures. ECO
Actuator PotFree cannot be mounted in metal cabinets or metal
enclosures because metal blocks wireless signals. ECO Actuator
PotFree can alternatively be mounted in a plastic enclosure next to
a metal cabinet or metal enclosure.
Note: Do not place the white antenna wire directly on / close to
metal, metal cabinets, cables or other antennas.
Place minimum 30 cm away from GSM antennas.
230 VAC operating voltage must be connected to blue (N) and
brown (L) wire. Red wires are connected to the potential-free relay.
Wireless communication
ECO Actuator PotFree must be connected wirelessly to a Sikom
ECO gateway. The ECO gateway allows one to remotely control
ECO Actuator PotFree by using the Sikom Living app on an Iphone
or Android phone.
Wireless range
ECO Actuator PotFree has an antenna. The antenna is the white
wire that protrudes from the unit. The best possible wireless range
is achieved if the white antenna wire is stretched out and not curled
together. It is also an advantage if it is not placed close to other
wires and metal.
Wireless range must be tested at the installation site.
In general: Wireless range between ECO Actuator PotFree and the
Sikom ECO gateway is about 60 meters in line of sight. Walls,
ceilings, floors and other obstacles will reduce the range.
Massive timber and concrete are examples of materials that will limit
the wireless range. Wireless range in a regular timber frame
building is usually max. 10 meters.
Position the Sikom gateway centrally / within wireless range of the
ECO Actuator PotFree.
Relay
Inside the ECO Actuator PotFree there is a relay that works like a
switch. This relay is normally used to provide a control signal to
other equipment. If the ECO Actuator PotFree is used to switch
electric current, the maximum load must not exceed 10A @
230VAC (resistive load)
Relay
functioning:
Register ECO Actuator PotFree to a Sikom gateway
In order to control the ECO Actuator PotFree, it must be registered
to a Sikom ECO gateway.
1. Activate the registration procedure on the Sikom ECO Gateway.
Procedure is described in the manual for the gateway.
2. Within 1 minute, - Use a ballpoint pen or similar and press and
hold the button on the ECO Actuator PotFree for 2 seconds.
If Sikom Living app is online with the gateway, a notification will be
received after a successful registration. Repeat procedure if
registration is unsuccessful.
Security feature
Inside the ECO Actuator PotFree, there is an overheating protection
circuit which switches off the relay in case of overheating. In case of
overheating, an alert is sent to the app system.
Check load and connections if overheating occurs. If the ECO
Actuator PotFree is damaged or affected by overheating, it should
be replaced. If the problem is resolved and the ECO Actuator
PotFree is found in order, reset the overheat protection by
disconnecting power to the ECO Actuator PotFree for 1 minute.
Warranty
Sikom AS products are covered by a two year warranty against any faults due to material
flaws or manufacturing errors, which limit or render useless certain functions described for
the product. The warranty requires the customer to present the original receipt, with date of
purchase and type of equipment clearly readable.
What is covered by the warranty?
During the warranty period, Sikom AS. reserves the right to repair the product or to replace
defective parts with functionally equivalent parts. If, after several attempts, Sikom AS is
unable to correct the problem, and the product does not work as described in the manual,
Sikom may elect to refund the purchase price or to replace the product with a functionally
equivalent one. All replaced parts and products become the property of Sikom AS.
What is not covered by the warranty?
Indirect damage to life, health, property, revenue and environment caused by circuits and
appliances connected to the units (install and use this product responsibly).
Costs related to (re)installing, transporting and dismantling units; recycling may be
governed by special rules.
Damages caused by use outside of the operating conditions specified in the manual.
Malfunctions caused by transport damages.
Any unauthorized repair, modification or disassembly.
Use of non-original parts.
External factors, such as lightning, power supply issues, mobile network issues, flood
damage or fire.
Units with modified, removed or unreadable serial number.
Technical specifications:
Manufacturer ………………………………………………… Sikom AS
Article name
…………………………………… ECO Actuator PotFree
Article number
………………………………….……………80 001 50
Model number
…………………………………………… 300-9795V10
Operating temperature
:………………….………………-20 C to +50 C
Power supply
:…………………………………………… 230VAC, 50Hz
Maximum load
:……… 10 Ampere/2300W @230VAC (resistive load)
Radio:…………………………Sikom ECO series, 433.9 MHz , 10mW
Size
: ………………………………………………………47x47x19mm
Approval:
……………………………………….………………………CE
Hereby, Sikom AS declares that the radio equipment type ECO
Actuator PotFree is in compliance with Directive 2014/53/EU. The
full text of the EU declaration of conformity is available at the
following internet address: www.sikom.no
Contact information
Sikom AS
Phone:
+47 740 85 960
Neptunveien 6
E-mail:
N-7652 Verdal, Norway
Web:
www.sikom.no
