Siko MSAC501, Additional To The Original Installation Instructions

Page: 31 / 36

MSAC501-S(RS485)
Service mode (RS485 mode) English
MSAC501-S(RS485) · Date 01.07.2019 · Art. No. 88115 · Mod. status 168/19
31
Command Length Reply Description
Py 2
VZxxxx>
Ê
(7byte)
Reading the analog signals and the para-
meter ResponseDelay:
VZ = + / -
y = 0 ... 2
y = 0: COS
y = 1: SIN
y = 2: ResponseDelay
xxxx = 0 ... 2047 (decimal)
Q 1 4byte Position value in currently chosen resolu-
tion in binary notation.
R32 3
Adr.xx
Ê
(8byte)
Reading the SIKONETZ3 address
xx = 01 ... 31
Sxxxxx 6
>
Ê
(2byte)
Reset encoder to factory settings or trig-
ger actions:
xxxxx = 00000: Setting the position value
to the calibration value
xxxxx = 00100: Triggering encoder/ band
adjustment
xxxxx = 11100: Setting the encoder to
factory setting
Ty 2
>
Ê
(2byte)
Setting counting direction and output
code:
y = 0: ascending values when encoder tra-
vels towards the cable connection (fac-
tory setting)
y = 1: descending values when encoder
travels towards the cable connection
y = 2 or 3: results in an error message
y = 4: position value filter OFF (factory
setting)
y = 5: position value filter ON
V3200xx 7
>
Ê
(2byte)
Writing the SIKONETZ3 address
xx = 01 ... 31
V330xxx 7
>
Ê
Input of parameter "Response-Delay"
xxx = 001 ... 250 (see also the hint to the
parameter "Response-Delay")