EH-5500FD Installation Manual
Page 38
The first section allows configuring the following parameters:
Name – you can give a name for each system
Date – [YYYY.MM.DD]
Time – [HH:MM:SS]
Click
Next
to continue.
3.4.2
Quick Configuration: Step 2
– Radio
Figure 3-6 Quick Config Page: Step 2 - Radio
This section allows configuring the following parameters:
Channel Bandwidth [MHz] – 1250 MHz.
Tx Frequency [MHz] – transmit frequency.
Rx Frequency [MHz] – R/O field, updated based on Tx frequency.
Tx Power [dBm] – ODU’s transmit power. Default is the max power, based on
product’s specs. Minimum configurable Tx power is -35dBm (note that actual
minimum Tx power is based on product’s specs).
The Tx power value sets the transmit power for the highest modulation profile.
In case lower modulation profile(s) has higher max Tx power (based on produc t’s
specs), the Tx power will be increased automatically without indication in RF
configuration menu.
Mode – operational mode of the link:
o
Alignment – Carrier Wave transmission. Used for antenna alignment. No
data over the radio link.
Note:
Adjust Tx Power so the RSSI at the remote end will not exceed -35dBm (overload
threshold).