EH-5500FD Installation Manual
Page 18
2.6.2
Mounting the ODU using the 1ft Mounting Bracket
1. Unit mounting screws and bolts
6. Azimuth adjustment lock bolts
2. Back mounting bracket
7. Elevation adjustment lock bolts
3. Front mounting bracket
8. Azimuth fine adjustment screw (± 8
)
4. Quick release plate (attached to ODU)
9. Elevation fine adjustment screw (± 16
)
5. Quick release hooks
10. Elevation screw tension band and pin
Figure 2-3 EtherHaul Mounting Assembly Components
Note:
Torque level for tightening the nuts and bolts is 8nm.
1.
Prior to mounting, unpack the mounting kit package and attach the two unit
mounting screws (
) to the front mounting bracket (
), securing them with
mounting bolts.
2.
Assemble the back (
) mounting bracket to the front (
) mounting bracket
using one bolt and separate them by about 120 degrees so that the assembly
can to be attached to the mounting pole.
