Ba_MH3211_en
Operating Manual MH 3211
page 7 of 14
4.4 Pop-up clip
Handling:
•
Pull at label “open” in order to swing open the pop-up clip.
•
Pull at label “open” again to swing open the pop-up clip further.
Pop-up clip closed
Pop-up clip at position 90°
Pop-up clip at position 180°
Function:
•
The device with a closed pop-up clip can be plainly laid onto a table or attached to a belt, etc.
•
The device with pop-up clip at position 90° can be set up on a table, etc.
•
The device with pop-up clip at position 180° can be suspended from a screw or the magnetic
holder GMH 1300.
Device attached to a belt
Device set up on a table
Device suspended from
magnetic holder
GMH 1300
5 Start Operation
Connect sensor and turn on device via
key.
After segment test
the device displays some configuration:
•
If the surface correction factor is adjusted, the display will show
„SCF.x“ and its value shortly.
After that, the device is ready for measuring.