Operation
i
ndu
Q
®
- Series VMM
- 28 -
© SIKA
•
Ba_VMM_us
•
09/2018
Customer password:
The customer password is intended to pre-
vent changes for software parameters of the
VMM by the control unit without permission.
If the operator does not enter a valid pass-
word, all settings can be displayed but not
changed.
For selecting the desired function please use
the key
and
.
After selecting the function Change custom-
er password and pressing ENTER key, the
operator enters the parameter level for
changing the customer password.
The following will be displayed:
The password can be changed according to
the description in section "Input window /
modify a value".
After entering a valid password, the following
message will be displayed:
If the entered password is not correct, the
following message will be displayed:
Notice
The factory set for the customer
password is
0002
.
A valid customer password allows changes
for all software parameters that are permis-
sible for customers.
After the operator switched off the device or
no keystroke occurs for about 15 minutes,
the authorization for changes are cancelled
and the password must be entered again.
Change customer password:
After entering a valid customer password,
you may change the existing password and
enter a new one.
The prerequisite for this is the previous, cor-
rect entry of the currently valid customer
password.
For selecting the desired function please use
the key
and
.
After selecting the function
Change cus-
tomer password
and pressing ENTER key,
the operator enters the parameter level for
changing the customer password.
The following will be displayed:
According to the description in Section "Input
window / modify a value" the changes can be
done.
Press ENTER key to confirm and save the
new password.
Notice
A copy of the password should be kept
in a safe place
.
Reactivation of a dis-
play electronics at the vendor’s site
due to a lost password is not part of
our warranty!
Password?
0000
Password
valid
Password
invalid
New Password?
0000
