4
Software Installation
This section provides information on how to install the UltraATA 133
PCI drivers for the following operating systems:
New & Existing Windows 98 SE
New & Existing Windows ME
New & Existing Windows NT 4.0
New & Existing Windows 2000
New & Existing Windows XP
Windows 98 SE Driver Installation
For New Windows 98 SE Installation
1. Install the board and follow Microsoft procedures to install
Windows 98 SE accordingly.
2. Once Windows has been installed, right click My Computer
and click Properties. Select Device Manager tab.
3. Double click PCI Mass Storage Controller listed under Other
Devices
.
4. Select Driver tab, then click Update Driver button.
5. Insert the driver diskette and click Next.
6. Select Search for the best driver for your device and click
Next
.
7. Check Specify a location, uncheck the other boxes, type in A:,
then click Next. Click Next again, then Finish.
8. Remove the driver diskette and restart Windows to complete
driver installation.
For Existing Windows 98 SE Installation
1. Install the board and boot up Windows 98 SE.
2. At the Add New Hardware Wizard, click Next.
3. Select Search for the best driver for your device and click
Next
.
4. Insert the driver diskette, check Specify a location, uncheck
the other boxes, type in A:, then click Next.
5. Click Next, then Finish.
6. Remove the driver diskette and restart Windows to complete
driver installation.
