9
Low Level Format
Low Level Format
is built into the RAID BIOS to make it
more convenient to erase the entire contents of a hard
disk drive, including data, drive and partition
information. The Low Level Format utility works on
single hard drives only, before the RAID set is configured.
Driver Installation
This section provides information on how to install the
Serial ATA PCI RAID
drivers.
Windows 98SE
For A New Installation
1.
Setup the RAID array prior to Windows installation.
2.
Follow Microsoft Windows 98SE installation
procedure.
3.
Once Windows has installed, right click
My
Computer
, click
Properties
,
click
Device Manager.
4.
Double click
PCI RAID controller
listed under
Other Devices
.
5.
Select
Driver
tab, then click
Update Driver
button.
6.
Insert the driver CD, then click
Next
.
7.
Select
Search for the better driver ...
and click
Next
.
8.
Check
CD-ROM drive,
uncheck the other boxes
,
then click
Next
. Click
Next
again, then
Finish
.
9.
Remove the driver
CD, then restart Windows to
complete the installation.
When Windows resumes, go to
SATARaid GUI
on page
17 and install the RAID monitoring utility.
Summary of Contents for Serial ATA PCI RAID
Page 34: ...34 Blank Page ...
