17
5.
Remove the driver
CD, shutdown Windows, and
setup your RAID array.
When Windows resumes, go to
SATARaid5 GUI
on
page 19 and install the RAID monitoring utility.
Windows XP/Server 2003 (64-bit)
For A New Installation
A new installation requires a floppy disk for the driver
installation. To make this floppy disk, copy the
contents
of the
64bit
folder, found on the driver CD, onto a blank
floppy disk then follow the directions below.
1.
Setup the RAID array prior to Windows installation.
2. Follow Microsoft procedure to install Windows
accordingly.
3. At
the
Windows Setup
screen, press
F6
to continue.
Note
: Prior to this step, you may be prompted to
restart in order to continue with the installation.
4.
Insert the driver
diskette. Press
S
then press
Enter
.
5. Select
Silicon Image SiI... Controller (64-bit
Extended)
and press
Enter
.
6. Press
Enter
to continue and follow on-screen
instructions to complete the installation.
When Windows installation completes, go to
SATARaid5
GUI
on page 19 and install the RAID monitoring utility.
For An Existing Installation
1.
Install the board and boot up Windows.
2. At
the
Found New Hardware Wizard
:
For XP (w/SP1 or earlier)/Server 2003
: go to step #3.
For XP (w/SP2 or later)/Server 2003 (w/ SP1 or later)
:
select
No, not this time
, then click
Next
.
Summary of Contents for Serial ATA 4-Channel PCI
Page 29: ...29 Blank Page...
Page 30: ...30 Blank Page...
