9
2.
During boot press
Ctrl+S
or
F4
to enter the
RAID
BIOS.
3. Select
Create RAID set
then press
Enter
.
4. Select
SPARE DRIVE
then press
Enter
.
5.
Select the replacement drive then press
Enter
.
6. When
asked
Are You Sure (Y/N)?
, press
Y
to confirm.
7. Press
Ctrl+E
to exit.
8. When
asked
Are you sure to exit (Y/N)?
, press
Y
to
exit.
Note:
If during restart the RAID BIOS reports an
incomplete RAID set
, disregard the message,
continue booting, and let the Mirror rebuild.
RAID 10 (Striping)
This RAID set is used on
New/Blank
hard drives, do not
use existing hard drive(s) with data. To create a Mirrored-
Striped set four hard drives are required.
For Manual Configuration
1.
As the BIOS boots press
Ctrl+S
or
F4
when prompted
to enter the
RAID
BIOS.
2.
At the next screen select
Create RAID Set
, then
press
Enter
.
3. Select
RAID10
then press
Enter
.
4. Select
Manual configuration
, then press
Enter
.
5.
Select chunk size from
4k
,
8k
,
16k
,
32k
,
64k
or
128k
,
then press
Enter
.
6. Select
the
first drive
, press
Enter
.
7. Select
the
second drive
, press
Enter
.
8. Select
the
third
drive, then press
Enter
.
Summary of Contents for Serial ATA 4-Channel PCI
Page 29: ...29 Blank Page...
Page 30: ...30 Blank Page...
