1
Serial ATA 4-Channel RAID
Quick Installation Guide
04-0370B
Introducing the
Serial ATA 4-Channel RAID
The
Serial ATA 4-Channel RAID
is an ultra high-speed
four channel Serial ATA controller for use in Pentium
class computers. It achieves burst data transfer rates up
to 150MB/s (1.5Gb/s) and supports various brands of
hard disk drives with capacities greater that 137GB.
Features and Benefits
•
Compliant with Serial ATA Specification, revision
1.0
•
Compliant with PCI Specification, revision 2.2
•
Provides four independent channels to support up
to four Serial ATA drives
•
Co-exists with on-board Ultra ATA controller
•
Supports 32-bit wide PCI bus at 66MHz
•
Supports RAID 0 (striping), RAID 1 (mirroring) and
RAID 10 (mistriping) RAID Arrays and
Single and JBOD modes
•
Lower pin count and voltage requirement, plus
better cabling over traditional Parallel ATA make
Serial ATA the controller of the future
System Requirements
• Pentium
®
or equivalent computer with one available
PCI slot
• Windows
®
2000 / XP (32-/64-bit) / Server 2003
(32-/64-bit) / Vista (32-/64-bit)
Summary of Contents for Serial ATA 4-Channel PCI
Page 29: ...29 Blank Page...
Page 30: ...30 Blank Page...
