6
To Verify Windows 2000/XP/2003 Installation
1.
Right click
My Computer
and click
Manage
.
2.
Select
Device Manager
.
3.
Double click
SCSI and RAID Controllers
, then
double click
Initio inic1620 S-ATA Adapter
to
display driver properties. A message
This device is
working properly
is displayed in the dialog box, the
driver has been correctly installed.
External Device Connection
External Serial ATA devices should come with their own
accessories. In most cases, you just need to power up the
external device and connect it to the external port. For
more information, please refer to the external device's
manual.
Hot-Plugging Hard Disk Drives
To remove a drive from a powered up system, do the
following:
1.
Right click
My Computer
and click
Manage
.
2.
Select
Device Manager
.
3.
Click
Disk Drives
, right click the target disk and
select
Disable/Enable
.
4.
You can now remove the target disk.
BIOS Configuration
The
SATA II-150 PCI i/e
BIOS
will appear everytime your
system starts up. If the BIOS doesn't show, please try
your controller in another PCI slot. During this
(Post)
process, the BIOS
will show up and indicate the devices
attached to it.
